SMP系列磨粉機

SMP series pulverizer

工作原理/Works

本機工作部分為刀盤。高速粒子在撞擊齒板后部分被粉碎，經吸風抽出，而較大粒子則繼續撞擊、粉碎后被抽出。這樣減少了刀盤負荷，提高磨粉效率，又能使粉料得到均勻冷卻。

溫度低是該機的主要優點。按熱功當量：每小時工作后轉換為860千卡熱量。本機為外抽風，風量達50m3/kw，由進、出口風溫差，帶走大部分熱量。少部分熱量由水冷卻解決。要求:冷卻水的進口溫度不大于25℃，出口水溫不大于45℃，夏天適當增加冷去口水流以降低溫度。

Working part of this machine for cutter, Some high-speed particles are crushed, After impacting dental plate, After the wind out, Large particles continue to impacting, crusher After out, This reduces the load cutter, Improve mill efficiency,

Requirements: cooling water inlet temperature of not more than 25℃, Export water temperature not more than 45℃, Summer due to increase cooling water flow to lower temperature.

Low temperature is the main advantage of machine .By mechanical equivalent of heat: after an hour for power is converted to 860 kcal. The machine is outside the ventilation, the wind reached 50m3/kw, from the import and export air temperature to remove most of the heat. A small part of the heat from the water cooling solution. Requirements: cooling water inlet temperature is not greater than 25℃, exit water temperature is not greater than 45℃, the cooling water flow to increase in summer due to lower the temperature.

主要技術參數/Main technical parameters